Cáp mạng Dintek CAT.6 UTP (1101-04023, 100 mét/thùng)

Mã SP: 11030793 Hãng SX: Bảo hành:

Cáp mạng CAT.6 UTP Dintek 4-pairs, 23AWG, 100m/thùng

Cáp mạng Dintek CAT.6 UTP (1101-04023, 100 mét/thùng)

Part Number: 1101-04023

- Cáp mạng CAT.6 UTP Dintek 4-pairs, 23AWG, 100m/thùng.

- Khoảng cách truyền tín hiệu: 100 mét.

Features

- Conductor sizes for Cat.6 are set at 23AWG

- By keeping the gauge size of the conductor larger, there is less heat generation caused and less drop of voltage over distance

- Capable of handling the latest version of power over ethernet

- Cable has been tested over 500Mhz and has shown performance testing results allowing 10Gbit Ethernet transmission up to a length of 70mtrs

Standards Conformance

- ACMA approved to AS/CA S008

- ISO/IEC11801 2nd edition CLASS E

- ANSI/TIA-568-2.D standard

- CENELEC EN 50173-1, CENELEC

- PoE++ & 4PPoE - IEEE 802.3bt level 3 & 4

- Flame Rated: CM

Independent Verified Certifications

- Verified to ANSI/TIA-568-2.D Cat.6 102661868CRT-001b

- ACMA approved to AS/CA S008

Specifications

Construction
Conductor
Material	Bare Copper
Wire Size	23AWG
Insulation
Material	PE
Thickness	Nominal: 1.011 mm
Colors	Blue/White-Blue \| Orange/White-Orange \| Green/White-Green \| Brown/White-Brown
Unaged Elongation(%)	Min. 300%
Unaged Tensile Strength	Min. 1.683 Kgf/mm²
Jacket
Material	Flame Retardant PVC
Thickness	0.5 ± 0.02 mm
Diameter	6.0 ± 0.2 mm
Color	Gray (assorted upon request)
Fire Rated Class	CM
Physical Ranges
Insulation
Min. Tension Strength	Before Aging: Min. 1.683 Kgf/mm² \| After Aging: 75% before aging (100℃ X 48hrs)
Min Elongation (%)	Before Aging: 300% \| After Aging: 75% before aging (100℃ X 48hrs)
Jacket
Min. Tension Strength	Before Aging: Min. 1.407 Kgf/mm² \| After Aging: 75% before aging (100℃ X 168hrs)
Min Elongation (%)	Before Aging: Min. 100% \| After Aging: 50% before aging (100℃ X 168hrs)
Dielectric Strength	2500 VDC / 2 seconds
Min. Bending Radius	50 mm
Max. Pulling Tension	25 lbs
Installation Temperature	0℃ to +50℃
Operating Temperature	-20℃ to +70℃
Electrical
Conductor Resistance	Max. 7.32 Ω/100m at 20℃
DC Resistance Unbalance	Max. 2%
Pair-to-Ground Capacitance Unbalance	Max. 160 pF/100m
Dielectric Strength of Insulation	2500 V dc / 2 seconds
Insulation Resistance Test	Min. 5000 MΩ·Km
Mutual Capacitance	Max. 5600 pF/100m
Impedance 1~100MHz	100Ω ± 15%
Impedance 100-250MHz	100Ω ± 22%