Photoelectric Beam Sensor TAKEX PXB-100SW

Mã SP: 13306028 Hãng SX: Bảo hành:

12.337.000 VND (Đã bao gồm VAT)

Our ultra low-current PXB-100SW is designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure

Photoelectric Beam Sensor TAKEX PXB-100SW

- Our ultra low-current PXB-100SW is designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure.

Features

- 4 x synchronised high power beams.

- Low-current consumption for battery or solar operation.

- 4 selectable beam channels to prevent crosstalk.

- Double modulation for unsurpassed light immunity.

- Increased beam separation minimises nuisance alarms.

- Vivid internal colour aids beam alignment procedure.

- Lightning and surge protection up to 15kV.

- Environmental monitoring circuit.

- Dynamic auto-gain lock (AGL).

- 50,000 lux sunlight immunity.

- IP65 housing.

- Optional BA-6SLA solar panel/battery pack available.

Specifications

Model	PXB-100SW
Product type	Photoelectric Beam Sensor
Detection system	Near infrared pulsed beam interruption system (TX-RX 4 beam simultaneous interruption)
Infrared beam	Double modulation pulsed beam by LED
Protection distance	Outdoor 100m (330ft) or less Indoor 200m (660ft) or less
Max. beam range	Outdoor 1000m (3300ft) or less Indoor 1000m (3300ft) or less
Response time	0.05 sec. to 0.7 sec. (Variable at pot)
Power supply	5 to 30VDC (polarity)
Current consumption	5 to 8VDC - Transmitter: + Max: 3.7mA + Max 8.2mA - Receiver: + Max: 2.3mA + Max 10mA 10 to 30VDC - Transmitter: + Max: 5.2mA + Max 9.4mA - Receiver: + Max: 3.1mA + Max 10.7mA
Alarm output	- Dry contact relay output form N.O./N.C switchable - Contact action : Interruption time (min. 2 sec) - Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor
Environmental output	- Dry contact relay output form N.O./N.C. switchable - Action: activated when weather condition worsens - Capacity: 30V (AC/DC) 1A (resistive load) Protective resistor
Tamper output	- Dry contact relay (N.C.) - Action: activated when cover is detached - Capacity: 30V (AC/DC) 0.1A (resistive load) Protective resistor
Alarm LED	Red LED (Receiver) ON: when an alarm is initiated
Attenuation LED	Red LED (Receiver) ON: when beam is attenuated
Ambient temperature range	-35°C to +66°C (-31°F to +151°F)
Beam Adjustment	Horizontal : ±90° / Vertical : ±20°
Functions	- Modulated beam frequency selection - Tone indicator - Environmental module - Beam power selection - Transmitting power adjustment - Alarm output selection - Environmental output selection - Monitor jack - Tamper - Response time adjustment - Upper / Lower beam switch - Wireless Checker
Mounting positions	Outdoor, Indoor
IP rating	IP65
Wiring	Terminals
Weight	Transmitter: 1500g (52.5oz) Receiver: 1550g (54.3oz)
Appearance	PC resin (wine red)

- Bảo hành: 12 tháng.

Xem thêm mô tả