240W 48VDC DIN Rail Power Supply Unit D-Link DIS‑N240‑48
- Universal AC input/ Full range.
- Built-in active PFC function.
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature.
- Cooling by free air convection.
- Can be installed on DIN rail TS-35/7.5 or 15.
- UL 508 (industrial control equipment approved.
- EN61000-6-2 (EN50082-2) industrial immunity level.
- 100% full load burn-in test.
Specifications
| MODEL | DIS‑N240‑48 |
| OUTPUT | |
| DC VOLTAGE | 48V |
| RATED CURRENT | 5A |
| CURRENT RANGE | 0 ~ 5A |
| RATED POWER | 240W |
| RIPPLE & NOISE (max.) Note.2 | 150mVp-p |
| VOLTAGE ADJ. RANGE | 48 ~ 55V |
| VOLTAGE TOLERANCE Note.3 | ±1.0% |
| LINE REGULATION | ±0.5% |
| LOAD REGULATION | ±1.0% |
| SETUP, RISE TIME | 1500ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load |
| HOLD UP TIME (Typ.) | 28ms/230VAC 22ms/115VAC at full load |
| INPUT | |
| VOLTAGE RANGE Note.4 | 90 ~ 264VAC 127 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz |
| POWER FACTOR (Typ.) | PF>0.98/115VAC, PF>0.95/230VAC at full load |
| EFFICIENCY (Typ.) | 90.00% |
| AC CURRENT (Typ.) | 2.5A/115VAC 1.3A/230VAC |
| INRUSH CURRENT (Typ.) | 20A/115VAC 35A/230VAC |
| LEAKAGE CURRENT | |
| PROTECTION | |
| OVERLOAD | 105 ~ 130% rated output power |
| Protection type : Constant current limiting, recovers automatically after fault condition is removed | |
| OVER VOLTAGE | 56 ~ 65V |
| Protection type : Shut down o/p voltage, re-power on to recover | |
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down |
| ENVIRONMENT | |
| WORKING TEMP. | -20 ~ +70℃ (Refer to 'Derating Curve') |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH |
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) |
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
| SAFETY & EMC | |
| SAFETY STANDARDS | Ul508, TUV EN60950-1 approved; (meet EN60204-1) |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH |
| EMC EMISSION | Compliance to EN55032 (CISPR32), EN61204-3 Class B, EN61000-3-2,-3 |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A |
