52-Port SmartPro Gigabit Switch D-Link DGS-1510-52X
-48-port UTP 10/100/1000Mbps, 4-port 10G SFP+ (H/W : A1, Rackmountable) /E: EU 2 round pin power cord, /B: UK 3-pin power cord.
-The DGS-1510-52X is D-Link's latest generation of SmartPro switches with 10G port connectivity, making them ideal for deployment in SME/SMB aggregation environments. -The DGS-1510-52X provides a reliable and scalable interconnection between core switches and edge switches.
-The DGS-1510-52X PoE-enabled switches are ideal for businesses looking to power VoIP phones, wireless access points, or network cameras.
10G SFP+ Stacking/Uplink Ports
-Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth with cost efficiency.
-Users can also easily configure and manage any of the DGS-1510-52X in a single stack.
-With 20 Gbps full duplex capabilities, the DGS-1510-52X 10G connectivity to core networks and servers while still maintaining fast data transfer rates.
Layer 3 Traffic Management
-The DGS-1510-52X provides static routing, allowing you to segment your network into workgroups and communicate across VLANs without degrading application performance.
-With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router, allowing it to manage external traffic and security.
Extensive Layer 2 Features
-The DGS-1510-52X switches are equipped with a complete lineup of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP).
-The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer.
-Network maintenance features include Loopback Detection and Cable Diagnostics; Loopback Detection is used to detect loops created by a specific port or VLAN and will automatically shut down the affected port or VLAN.
-The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can determine cable quality and can quickly discover sections of cabling that need to be replaced.
Traffic Classification & QoS
-The DGS-1510-52X supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments.
-Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.
-This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities.
-ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data.
-The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN.
-With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic.
-Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic.
-As a result, these voice and video packets take precedence over other packets ensuring uninterrupted VoIP for network users.
Secure your Network
-D-Link's innovative Safeguard Engine protects DGS-1510-52X against traffic flooding caused by malicious attacks.
-The series also supports 802.1X portbased authentication, allowing the network to be authenticated through external RADIUS servers.
-The DGS-1510-52 supports both MAC and Web-based access control.
-These provide a user-friendly way to alleviate deployment time, giving customers an effective and efficient authentication choice.
-With an Access Control List (ACL), the DGS-1510-52X both enhances network security and helps to protect the internal IT network by screening ingress traffic based on any user defined content.
-The DGS-1510-52X includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network.
-For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.
IPv6 Ready
-The DGS-1510-52 is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IP-MAC-Port Binding (IMPB) to ensure seamless integration of next generation networks.
-The DGS-1510-52 also supports an IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks.
Versatile Management
-The DGS-1510-52 supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP address.
-This simplifies management of small workgroups or wiring closets while reducing the number of IP addresses needed in your network.
-The DGS-1510-52X provides a D-Link Network Assistant Utility and a webbased management interface that enables administrators to easily set up and remotely manage their networks.
-The D-Link Network Assistant Utility allows customers to easily discover and perform initial setup on multiple D-Link products simultaneously.
-This greatly reduces the deployment time for services required by network administrators such as device firmware upgrades, configuration backup and restoration, setting IP addresses, or even solution deployment like ASV.
-The DGS-1510-52X also supports fully featured Command Line Interface (CLI) and SNMP MIBs.
-It provides the capability of central management in a large scale network.
-CLI management of the switches is also available via a console port.
-With out-of-band manageability, accessing the switch is still possible even if its network data plane is overwhelmed by bulk or malicious traffic.
Energy Saving
-The DGS-1510-52X switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology.
-Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease power usage when traffic is low.
-For environments not fully supporting the standard, DGS-1510-52X switches offer advanced powersaving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.
-The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours.
Technical Specifications
| Port Standards & Functions | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation. |
| Number of Ports | 48 10/100/1000 Mbps |
| 4 10G SFP+ | |
| Network Cables | UTP Cat. 5, Cat. 5e (100 m max.) |
| EIA/TIA-568 100-ohm STP (100 m max.) | |
| Full/Half Duplex | Full/half duplex for 10/100 Mbps speeds |
| Full duplex for Gigabit speed | |
| Media Interface Exchange | Auto or configurable MDI/MDIX |
| Switching Capacity | 176 Gbps |
| Transmission Method | Store-and-forward |
| MAC Address Table | 16,000 entries per device |
| MAC Address Update | Up to 512 static MAC entries |
| Enable/disable auto-learning of MAC addresses | |
| Maximum 64 bytes Packet Forwarding Rate | 130.95 Mpps |
| Packet Buffer Memory | 3 MB per device |
| AC Input | 100 to 240 VAC 50/60 Hz internal universal power supply |
| Maximum Power Consumption | 44.2 W |
| Standby Power Consumption | 28.6 W / 100V |
| 28.9 W / 240V | |
| Smart Fan Quantity | 2 |
| Acoustics | 45.8 dB(A) |
| Heat Dissipation | 138.8 BTU/hr |
| Operation Temperature | 23 to 122 ˚F (-5 to 50 ˚C) |
| Storage Temperature | -4 to 158 ˚F (-20 to 70˚C) |
| Operation Humidity | 0% to 95% non-condensing |
| Storage Humidity | 0% to 95% non-condensing |
| Dimensions | 440 x 250 x 44 mm |
| Weight | 2.4 kg |
-Bảo hành: 36 tháng.
