Actuator THEBEN BME 6 T KNX
- 6-way binary input MIX2.
- Extension module MIX2.
- For upgrading to maximum of 18 channels.
- 6 floating universal and wide-range voltage inputs (10-240 V AC/DC or internally generated auxiliary voltage of approx. 12 V DC).
- 2 additional channels operable by buttons on the device, but without input.
- Up to two extension modules MIX or MIX2 can be connected to one base module.
- Device and KNX bus module can be swapped independently of each other.
- Removable KNX bus module enables devices to be changed without reprogramming.
- Manual set-up and use of actuator is possible without KNX bus module.
- LED switching status display for each channel.
- Manual operation on device (even without bus connection).
- Manual operation per channel for simulating the input states.
- All inputs can be operated with different voltages and at different potentials.
- Connectable cable length up to 100 m.
- Free allocation of functions: Switch/push button, dimming, blinds/roller blinds, counter, repeat telegram, sequences.
Specifications
| Model | BME 6 T KNX |
| Installation type | DIN rail |
| Width | 4 modules |
| Type of connection | KNX bus terminal |
| Max. cable cross section | Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm² |
| Voltage inputs | 10 VDC – 240 VAC 2mA |
| Max. cable length | 100m |
| Auxiliary voltage | 12 V DC/18 mA, no SELV |
| Suitable for SELV | Yes, if all inputs are connected with SELV |
| Ambient temperature | -5°C … +45°C |
| Type of protection | IP20 |
| Protection class | II according to EN 60 730-1 |
- Hãng sản xuất THEBEN của Đức.
- Bảo hành: 12 tháng.
