Actuator THEBEN DM 4 T KNX
- 4-way universal dimmer actuator FIX2.
- For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps.
- Also suitable for dimming of dimmable energy-saving lamps.
- Also suitable for controlling fans.
- LED switching status display for each channel.
- Manual operation on device (even without bus connection).
- Dimming output: 400 W/VA per channel or 800 W/VA in parallel operation.
- The dimming output can be upgraded by using additional dimmboosters 'DMB 1 T KNX' - dimming output 300 W/VA for each dimmbooster. Output to a maximum of 2000 W/VA by using max. 4 boosters possible.
- Automatic load detection (can be deactivated).
- For R, L and C loads.
Specifications
| Model | DM 4 T KNX |
| Operating voltage KNX | Bus voltage, |
| Operating voltage | 230 VAC |
| Stand-by consumption | ~1,5W |
| Frequency | 50 Hz |
| Number of channels | 4 |
| Installation type | DIN rail |
| Width | 8 modules |
| Type of connection | Terminal screws | Bus connection: KNX bus terminal |
| Max. cable cross section | Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm² |
| Lamp types | Incandescent, low-voltage and high-voltage halogen and dimmable energy saving lamps and LED |
| Switching capacity per channel | 400W |
| Switching capacity in parallel operation | 800W |
| LED lamp | Trailing edge (RC-mode): 400 W |
| Energy saving lamps | Trailing edge (RC-mode): 400 W |
| Switching capacity min. | 5W |
| Max. cable length | 100m |
| Ambient temperature | -5°C … +45°C |
- Hãng sản xuất THEBEN của Đức.
- Bảo hành: 12 tháng.
