Actuator THEBEN HME 6 T KNX

Mã SP: 13130137 Hãng SX: Bảo hành:

TẠM HẾT HÀNG

6-way heating actuator MIX2. With 6 temperature controllers (P/PI) for heating and cooling.

Actuator THEBEN HME 6 T KNX

- 6-way heating actuator MIX2.

- With 6 temperature controllers (P/PI) for heating and cooling.

- Extension module MIX2.

- For upgrading to maximum of 18 channels.

- For controlling 6 thermal actuators 24 V - 240 V AC in 2 groups with 3 outputs and 450 mA each.

- (Due to the switch-on behaviour of the actuators, we recommend not to exceed a maximum load of 3x1 actuators 24 V AC or 3x5 actuators 230 V AC).

- Short-circuit-proof and overcharge protected.

- Continuous or switching actuating value selectable.

- Valve protection function can be deactivated.

- With the modes: Comfort, standby, night as well as frost/heating protection.

- Changeover to summer mode possible.

- Up to two extension modules MIX or MIX2 can be connected to one base module.

- Device and KNX bus module can be swapped independently of each other.

- Removable KNX bus module enables devices to be changed without reprogramming.

- Manual set-up and use of actuator is possible without KNX bus module

- LED switching status display for each channel

- Manual operation on device (even without bus connection)

Specifications

Model	HME 6 T KNX
Stand-by consumption	~0,2W
Installation type	DIN rail
Width	4 modules
Number of channels	6
Type of connection	Screw terminals
Max. cable cross section	Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² \| Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
Switching output	Not potential-free
Output	Triac, 0,45 A
Voltage output	24 V AC - 240 V AC
Frequency output	50 – 60 Hz
Suitable for SELV	Yes, if all inputs are connected with SELV
Switching of various phases	Possible
Ambient temperature	-5°C … +45°C
Type of protection	IP20
Protection class	II according to EN 60 669

- Hãng sản xuất THEBEN của Đức.

- Bảo hành: 12 tháng.

Xem thêm mô tả