Actuator THEBEN HMG 6 T KNX
- 6-way heating actuator MIX2.
- With 6 temperature controllers (P/PI) for heating and cooling.
- Base module MIX2.
- Can be upgraded to maximum of 18 channels.
- For controlling 6 thermal actuators 24 V - 240 VAC in 2 groups with 3 outputs and 450 mA each.
- (Due to the switch-on behaviour of the actuators, we recommend not to exceed a maximum load of 3x1 actuators 24 VAC or 3x5 actuators 230 VAC).
- Short-circuit-proof and overcharge protected.
- Continuous or switching actuating value selectable.
- Valve protection function can be deactivated.
- With the modes: Comfort, standby, night as well as frost/heating protection.
- Changeover to summer mode possible.
- Up to two extension modules MIX or MIX2 can be connected to one base module.
- Device and KNX bus module can be swapped independently of each other.
- Removable KNX bus module enables devices to be changed without reprogramming.
- Manual set-up and use of actuator is possible without KNX bus module.
- LED switching status display for each channel.
- Manual operation on device (even without bus connection).
Specifications
| Model | HMG 6 T KNX |
| Operating voltage KNX | Bus voltage, ≤4 mA |
| Operating voltage | 110 – 240 VAC |
| Frequency | 50 – 60 Hz |
| Stand-by consumption | ~0,3W |
| Capacity loss max. | 1,1W |
| Installation type | DIN rail |
| Width | 4 modules |
| Number of channels | 6 |
| Type of connection | erminal screws | Bus connection: KNX bus terminal |
| Max. cable cross section | Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm² |
| Switching output | Not potential-free |
| Output | Triac, 0,45 A |
| Voltage output | 24 V AC - 240 V AC |
| Frequency output | 50 – 60 Hz |
| Suitable for SELV | Yes, if all inputs are connected with SELV |
| Switching of various phases | Possible |
| Ambient temperature | -5°C … +45°C |
| Type of protection | IP20 |
| Protection class | II according to EN 60 669 |
- Hãng sản xuất THEBEN của Đức.
- Bảo hành: 12 tháng.
