Actuator THEBEN RME 8 S KNX
- 8-way switching actuator MIX2.
- Extension module MIX2.
- For upgrading to maximum of 24 channels.
- Up to two extension modules MIX or MIX2 can be connected to one base module.
- Device and KNX bus module can be swapped independently of each other.
- Removable KNX bus module enables devices to be changed without reprogramming.
- Manual set-up and use of switching actuators is possible without KNX bus module.
- LED switching status display for each channel.
- Manual operation on device (even without bus connection).
- Adjustable characteristics: e.g. switching, delayed switching, pulse function.
- Links, type of contact (NC contact/NO contact) and participation in central commands such as continuous On, continuous Off, central switching and save/call up scene.
- Switching functions: On/Off, pulse, On/Off delay, staircase light with warning
- Logical links: e.g. lock, AND, release, OR
Specifications
| Model | RME 8 S KNX |
| Values valid as of serial number | 1318XXXXX |
| Installation type | DIN rail |
| Width | 4 modules |
| Type of connection | Screw terminals |
| Max. cable cross section | Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm² |
| Number of channels | 8 |
| Type of contact | NO contact, 16A, 10A |
| Opening width | < 3 mm |
| Resistive load | 3680W |
| Incandescent lamp load | 2000W |
| Fluorescent lamp load (conventional) parallel-corrected | 1300 W (140 µF) |
| Fluorescent lamp load (conventional) not corrected | 2000 VA |
| Fluorescent lamp load (electronic ballast) | 1200 W |
| Energy saving lamps | 300 W |
| LED lamp < 2 W | 55 W |
| LED lamp 2-8 W | 180 W |
| LED lamp > 8 W | 200 W |
| Voltage output | 240 VAC |
| Switching output | Potential-free |
| Switching of various phases | Possible |
| Suitable for SELV | Yes if all channels switch at SELV |
| Ambient temperature | -5°C … +45°C |
| Type of protection | IP20 |
| Protection class | II |
- Hãng sản xuất THEBEN của Đức.
- Bảo hành: 12 tháng.
