Beams 4 tia đồng bộ TAKEX PB-200FA
- Beams 4 tia đồng bộ sử dụng ngoài trời/ trong nhà.
- Điều chế kép - mạch bù, lọc chống nhiễu (đèn ... - 50'000 lux).
- Chống báo động giả (lá rơi, chim), ống kính xoay.
Thông số kỹ thuật
| Model | PB-200FA |
| Type | Quad Beam |
| Detection system | Near infrared beam interruption system (4 beam simultaneous interruption) |
| Infrared beam | Double modulation pulsed beams by LED |
| Detection distance | Outdoor 660” (200m) or less |
| Max. arrival distance | 6600” (2000m) |
| Frequency Selection | Single Channel |
| Response time | 50msec. to 700msec. variable (Standard: 50msec.) |
| Supply voltage | 12V to 30V DC (non-polarity) |
| Current consumption | 85mA or less at protection (max.120mA or less) |
| Alarm output | Dry contact relay: NO or NC (selectable) Reset: Interruption time + off-delay (approx.1.5sec) Contact capacity: 30V (AC/DC) 1A or less |
| Tamper output | Dry contact: NC Contact operation: Output when cover is detached Contact capacity: 30V (AC/DC) 0.1A or less |
| LED indicator | Red LED (Receiver) ON: when an alarm is initiated. ON: when beam is attenuated. |
| Functions | Tone indicator, Alarm memory indication, Programmed AGC, Auto-gain lock, Monitor jack, Target color |
| Adjustment | Horizontal: ±90° Vertical: ±10° |
| Mounting position | Outdoor |
| Wiring | Terminals |
| Weight | Transmitter: 42oz (1,200g) Receiver: 45.5oz (1,300g) |
| Appearance | Resin (wine red) |
| Ambient temperature | -31°F to +151°F (-35°C to +66°C) |
| IP Rating | IP55 |
- Bảo hành: 12 tháng.
_m.jpg "Báo động TAKEX | Photoelectric Beam Sensor TAKEX PXB-50HF(E)")
