Photoelectric Beam Sensor TAKEX PXB-100HF-KH(E)
- Double Modulation: Double modulated beams are designed to distinguish the external lights. It increases the reliability in the outdoor security system. (50,000 lux light immunity).
- Quad High Power Beam
+ The beam power is 100 times of the minimum requirement.
+ The beam distance is 10 times of the described specification.
+ This high power beam maintains the ability to operate reliably in inclement weather.
- Wide Beam: The pitch between upper and lower beam is wider than previous models; drastically reducing false alarms initiated by birds and falling leaves.
- Advanced Reticle Sighting System: Enables a faster and easier alignment process.
- Increased Vertical Angle Adjustment
+ The horizontal is still ±90°;
+ ±20° Better accommodates alignment on uneven terrain, when compared to existing models (±10°).
- Target Color: Structure colors are tuned to the Peak Wavelengths of the Human Eye Response (Photopic eye response), to be easily targeted in the beam alignment process.
- Bi-Directional Wireless Alignment Checker: One person can accomplish system alignment in a fraction of the time; for dramatic savings on labor costs. (sold separately) . Bi Directional communication distance is max 200m.
- Low Current Consumption: 50% reduction in current consumption allows cost savings upfront (by reducing the required wire gauge on installation), and continues the savings for years to come with lower electrical consumption.
- Eco-Friendly: RoHS certified compliant: free from Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated biphenyl, and Polybrominated biphenyl ether.
- Lightening Protection: Maximum Lightening induced surge protection to 10,000VDC (normal mode) and 15,000VDC (common mode).
Specification
| Model | PXB-100HF-KH(E) |
| Detection system | Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption) |
| Infrared beam | Double modulation pulsed beam by LED |
| Protection distance | Outdoor 330' (100 m) or less |
| Max. arrival distance | 3300' (1000 m) |
| Response time | 0.05 sec. to 0.7 sec. (Variable at pot) |
| Power supply | 12 to 30V DC (Non-polarity) |
| Current consumption | 32 mA or less |
| Alarm output | Dry contact relay output form C Contact action Interruption time (Min.2sec.) Contact capacity: 30V (AC/DC) 0.25A (resistive load) Protective resistor |
| Environmental output | Dry contact relay output form C Action: Activated when weather condition gets worse Contact capacity: 30V (AC/DC) 0.25A (resistive load) Protective resistorv |
| Alarm LED | Red LED (Receiver) ON: when an alarm is initiated |
| Attenuation LED | Red LED (Receiver) ON: when beam is attenuated |
| Ambient temperature range | –31°F to+151°F (–35°C to+66°C) |
| Beam adjustment | Horizontal: ±90°, Vertical: ± 20° |
| Functions | Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection, Transmitting power adjutment, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitorjack, Response time adjustment, Upper/Lower beam switch, Wireless checker |
| Mounting positions | Outdoor, Indoor |
| Wiring | Terminals |
| Weight | Transmitter: 12.6 oz (360g) Receiver: 15.8 oz (450g) |
| Appearance | Optical unit: Resin Body: Resin |
- Bảo hành: 12 tháng.
-m.jpg "Báo động TAKEX | Đầu báo hồng ngoại kết hợp sóng microwave TAKEX COM-IN-100AH(E)")
_m.jpg "Báo động TAKEX | Photoelectric Beam Sensor Outdoor/Indoor TAKEX PB-20TE(E)")
_m.jpg "Báo động TAKEX | Photoelectric Beam Sensor TAKEX PXB-100ATC-KH(E)")
.jpg){kind=link}