Blind Actuator THEBEN JME 4 T KNX
- 4-way blind actuator MIX2.
- Extension module MIX2.
- Can be upgraded to maximum of 12 channels.
- For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps.
- Up to 2 extension modules can be connected to a base module.
- Up to two extension modules MIX or MIX2 can be connected to one base module.
- Device and KNX bus module can be swapped independently of each other.
- Removable KNX bus module enables devices to be changed without reprogramming.
- Manual set-up and use of actuators is possible without KNX bus module
- Free combination of switches, dimming, blinds and heating control as well as binary inputs.
- For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps.
- Manual operation on device (even without bus connection).
- LED Up and Down switching status display for each channel.
- Potential-free contacts for Up and Down per channel.
- Setting option for phase sequence and running time of device.
- Copy function for fast configuration.
Specifications
| Model | JME 4 T KNX |
| Number of channels | 4 |
| Installation type | DIN rail |
| Width | 4 modules |
| Type of connection | Screw terminals |
| Max. cable cross section | Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm² |
| Type of contact | NO contact, 6 A |
| Switching output | Potential-free, for SELV, if the whole device switches SELV |
| Ambient temperature | -5°C … +45°C |
| Type of protection | IP20 |
| Protection class | II according to EN 60 669 |
- Hãng sản xuất THEBEN của Đức.
- Bảo hành: 12 tháng.
