Cảm biến cửa cuốn TAKEX BUS-M5
- Cảm biến cửa cuốn công nghệ cảm ứng từ.
- Khoảng cách thiết lập: 3~12 cm.
- Tốc độ đáp ứng: 1-2 giây.
- Dòng điện: 25mA.
- Nhiệt độ hoạt động: -20℃~+50℃.
Thông số kỹ thuật
| Detection method | Magnetic modulation method |
| Setting distance | 3~12cm (between sensor and magnet sheet) |
| Response speed | 1-2 seconds |
| Power-supply voltage | DC10~30V (with polarity) |
| Current consumption | 25mA or less |
| Transmission method | Busnet transmission (time division multiplex transmission method) |
| Transmission signal | - Normal - Alarm - Low power supply voltage abnormality: Output when the power supply voltage is abnormally low. |
| Alarm memory function | Sensor control: Auto-reset operation with blinking for 3 minutes and lighting for 47 minutes Controller control: Control of memory indicator light on the controller side |
| Operation indicator light | Green indicator light Warning: Lights up |
| Instability indicator light | Red indicator light When the magnetic field strength is unstable: Lights up |
| Memory indicator light | Yellow indicator light When memory is activated: Blinks When memory is displayed: Lit |
| Inspection indicator light | Displayed in green When responding to alarm output: Lights up (however, it only functions when the controller side is set to inspection mode) |
| Usable ambient temperature | -20℃～+50℃ (No condensation) |
| Installation location | Indoor (Shutter winding case/Kamoi) |
| Wiring connection | Terminal type (M3 self-up terminal) |
| Mass | Approximately 130g |
| Exterior | Case: Resin (white), Window: Resin (gray) |
- Bảo hành: 12 tháng.
-m.jpg "Báo động TAKEX | Đầu báo hồng ngoại kết hợp sóng microwave TAKEX COM-IN-100AH(E)")
_m.jpg "Báo động TAKEX | Photoelectric Twin Beam Sensor TAKEX PB-4RTNS(E)")
