Module micro TOA M-11S
- For Balanced, Low Impedance Microphones.
- High and Low Cut Fileters for tone control, 4.2k Hz and 330 Hz, 6 dB/octave.
- Phantom Power, +22V DC for condenser-type microphones. Activate by default, cut Jumper J1 to disable.
- Responds To Mute Bus Activation, via Mute SEND module or switch-closure.
- Responds To Both Mute Bus #1 And Mute Bus #2 By Default (cut jumper(s) to disconnect individual mute bus).
- Two Mute Response Modes (cut jumpers to configure):
o Normally-ON - turns OFF during mute activation (most common).
o Normally-OFF - turns ON during mute activation (functions as an ON/OFF switch, useful for zone-paging microphones in multi-amplifier systems).
- Connector: Removable terminal block.
Specifications
| Model | M-11S |
| Faceplate Controls | Gain, high and low cut filters |
| PCB Controls | Phantom power defeat, mute bus selection |
| Input Impedance | 600Ω, balanced transformer-isolated |
| Sensitivity | -70 to -50 dBu |
| Gain | 32 to 52 dB |
| Noise (EIN) | -126 dBu, 200 ohms terminated |
- Sản xuất tại Trung Quốc.
- Bảo hành: 12 tháng.
